The automatic tube pump Dräger X-act 5000 is the first all-in-one solution
designed for measurements with Dräger short-term tubes and for sampling
tubes and systems. Ease of operation and a high degree of reliability
compliment the measurement and sampling of gases, vapors and aerosols.
Versatile and robust
The Dräger X-act 5000 introduces a new era of gas measurement: Only one
device is necessary for measuring and sampling. The automatic tube pump
is compatible with Dräger short-term tubes as well as sampling tubes and
systems. The robust housing supports the use of the pump to perform the
daily measuring tasks under tough conditions. The IS approved (pending)
Dräger X-act 5000 can be used for confined space applications and in
explosive gas atmospheres.
New pump concept
The key principle is the ability to provide the required flow characteristics of the Dräger Short-term Tubes, while also providing the option to be used with
Sampling Tubes and Systems requiring constant flow. Compared to the Dräger accuro hand pump, this new concept reduces the average measurement time
of the Dräger Short-term Tubes in case of a high number of strokes. The internal pump is also designed to use extension hoses up to a length of 30 meters
Simplicity of operation
The handling of gases, vapors and aerosols has never been easier. The automatic tube pump Dräger X-act 5000 directs the air to be measured through the
appropriate Dräger-Tubes effortlessly. It is comfortably carried with one hand or using the shoulder strap and is easily operated, even wearing protective
gloves. A simple and intuitive menu structure provides the user efficient operation with just a few button presses. Using the password-protected menu
repetitive operating modes can be set.
Automatic transfer of measurement parameters
A barcode printed on the label on the backside of a Dräger Short-term Tube box contains all relevant measurement parameters. Simply sliding the barcode
over the barcode reader of the pump, automatically transfers the name of the substance to be measured, the number of strokes, and the measuring range
to the display. The required steps to carry out the measurement are simplified with the Dräger X-act 5000 and the possibility of making an error is reduced
to a minimum.
Measurement in technical gases
To evaluate measurements in technical gases, the properties of the technical gas must be taken into consideration. Technical gases have a different viscosity
than ambient air. Therefore, the flow of the pump must be set accordingly. Following the operating steps in the mode „Measurement in Technical Gases“, the
Dräger X-act 5000 will automatically be adjusted to the required flow parameter and the measurement result can be read directly.
Direct settings for sampling
Depending on the Sampling Tubes or Systems, the required parameters for the test can be set directly, without the need for an external flowmeter. The Dräger
X-act 5000 automatically adjusts the flowrate. After setting the sampling time the pump can immediately be started. At the end of the measurement the
pump will stop automatically. The set data, the elapsed time and the pumped volume will be indicated on the display.