High media surface areas provides lower initial pressure drop
Specifications
• High media surface areas of pleated cartridges provides lower initial pressure drop
• Polyester/polypropylene blend media offers best alternative to string wound, resin-bonded, or spun cartridges
• No resin binders to break down and contaminate the filtrate
• Filter cartridge media layers are laminated together to provide depth filtration
• 100% synthetic fibers with no surfactants that cause foaming
• Available in standard 2 1/2″ and 4 1/2″ (BB Style) diameter configurations
• Pleated cartridges rated 20 micron and larger are washable and reusable – significantly reducing filtration costs
Applications
• RO Prefilters
• Food & Beverage
• Plating Solutions
• Microelectronics
• Electronics
• Oil / Gas
• Chemicals
• Paint/Inks
• Water & Wastewater
• Cosmetics
Pore Sizes | 0.35, 1A, 1, 5, 10, 20, 50 microns |
Nominal Lengths | 9.75", 10", 19.5", 20", 29.25", 30", 40" |
Gaskets/O-rings | Buna, EPR, Teflon, Viton |
Materials of Construction | Filter Media: Polyester / Polypropylene blend Core: Polypropylene End caps: Plastisol |
Maximum Operating Temperature | 140°F (60°C) |
Recommended Change-out Differential Pressure | 20 psid (1.4 bar) |
FDA Compliance | MEE products are manufactured of materials with no additivesor other manufacturing agents. All materials used in theproduction of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations. |