Labels

Status labels show at a glance where a container stands: Quarantine (orange), Sampled (blue), Released (green), Rejected (black), In Process (yellow) and Dispensed (red), plus Clean, Dirty, Allergen and Not for human use. They have a write-on paper front and Ultra Adhesive with a foil backing, so they also seal sampling holes in bags and sacks and stick to dusty surfaces. Plain white, red, yellow, green, blue and black labels come with Ultra Adhesive or Pharma adhesive; Clear Pharma Labels let you see the product and suit NIR work. ID labels carry a pre-printed number and barcode on a two-part perforated label, and aluminum label dispensers take 95 or 150 mm labels.

QC label FAQ

Ultra Adhesive or Pharma labels?

Ultra Adhesive labels have a very high-strength adhesive and a foil backing that gives a hermetic seal, for sealing sample holes in sacks and for dusty surfaces, from −20 to 70 °C. Pharma labels use a medium-strength, food-grade adhesive that conforms to FDA CFR 175.105, and work from −40 to 70 °C.

How do I seal a sack after sampling?

Sack samplers go in through the side of the sack; afterwards, an Ultra Adhesive label over the hole stops leaks. Sack samplers are in Free-Flowing Powder and Granule Samplers.

What size are the labels?

Status and plain labels are 95 × 95 mm, 500 to a roll; the Sampled label also comes as a 150 × 150 mm Pharma label, 250 to a roll. ID labels come 250 to a roll, and the dispensers fit 95 mm or 150 mm labels.