Equipment for sludge and sediment: Ekman and bottom dredges, AMS sludge samplers and sampler kits, the Snapper, Sludge Nabber and Swing Sampler, Sludge Judge tubes, Markland sludge blanket monitors, Teknofanghi thickeners, belt presses and bag dewatering, and silt bags.
4–20 mA analog output | ±2 cm (±1 in.) accuracy | 48 in. active probe | 110/220 VAC or 24 VDC, 15 W | CSA approved, CE conformance
0.1–15% SS (1,000–150,000 mg/L) | Ultrasonic (non-nuclear) | 4–20 mA output | NEMA-4X / IP-67 enclosure | 110/120/220/240 VAC or 24 VDC, 15 W
Max. Width When Fully Open: 275 mm (10.8'') | Length: 195 mm (7.7'') | Volume: 250 ml
• The 6 ft adjustable fiberglass pole extends to 12 ft
Adjustable aluminum pole: 4–6.5 ft (1.22–1.99 m) | Included bottle: 500 mL polyethylene | Compatible bottle range: 250–1,000 mL | Holder: polyurethane with snapper ring | 3-piece housing
300 / 500 / 1000 L tanks (CMP03 / CMP05 / CMP10) | AISI 304 stainless steel metal parts | Plunger metering pump, manual flow adjustment 10–100% | Polyethylene tank with visual level gauge | For small WWTPs, pairs with TEKNOBAG®-DRAIMAD®
Emulsion-base polyelectrolyte | Max 2,000 or 6,000 L/h solution | AISI 304 stainless steel | Automatic, digital controller | Min. 20 min ageing
Automatic continuous powder polyelectrolyte preparation | 750–6,000 L/h solution output (4 models: CAP07CE–CAP60CE) | AISI 304 stainless steel construction | 3-stage process: dilution, dispersion, ageing/storage tanks
Thickens 0.5–3% DS sludge to 5–15% DS | Capacity 10–60 m³/h per unit (depends on sludge type and dry-solids content) | Capture rate up to 98% | Archimedean-screw rotating drum | Plug-and-play with control panel + washing pump
Microfiltration down to 20 µm | Filter cloths 20/30/40/60/80/100 µm | Gravity-fed continuous filtration, minimal head loss | ABS supports + polyester cloth (full AISI 304 option) | 90% less reject water, no external wash water
AISI 304 stainless steel | Belt widths 600–2000 mm | Flow 1–140 m³/h | Cake dry solids 18–30% | Solids capture up to 98%
2–12 bag models (manual or pressurized) | AISI 304 stainless steel frame | 15–30% dry solids after a few hours | 50–95% DS after ~2 months bag storage | Treats 2–20 m³ sludge/day @ 1% DS
Dewatering Bag Size: 3' x 4' | Raw Material: PP | Color: Black | Micron: 50
Infrared LED optical probe | 10 m (33 ft) marked cable | 6x AA alkaline, ~1 yr battery life | 2.2 kg (5 lb) | -20 °C to 50 °C operating
• Three 4 ft. extensions | • Deluxe carrying case
$2,279.27 USD
Stainless steel construction | 2-1/4" & 3-1/4" diameters | 8"–12" lengths | 5/8" threaded connection | One-way valved core & auger tips
from$51.90 USD
Stainless steel | 1-1/4" dia x 24" length | 5/8" thread connection | Heat-treated replaceable core tip | Accepts 1" core catcher + 1" x 24" plastic liner
from$31.32 USD
1-1/4 in (3.2 cm) OD tubing | 15 ft overall — three 5 ft sections | 177 mL/ft (6 oz/ft) capacity | For settleable solids 5% or less | 1 ft graduation markers
Polycarbonate w/ UV stabilizer | 3/4 in (1.9 cm) OD tube, blue 1-ft markings | 3 x 5 ft sections (15 ft total) | Withstands heat to 280°F (138°C) | For ≤5% settleable solids
3/4 in (1.9 cm) OD clear plastic tubing | 15 ft overall, three 5 ft sections | 89 mL/ft (3 oz/ft) | For settleable solids 5% or less | 1 ft markers | Not for liquids over 165°F (74°C)
Equipment for sampling, monitoring and treating sludge and sediment. Sampling: AMS Ekman and bottom dredges and the Snapper for bottom sediment, sludge samplers and the multi-stage sampler kit for cores, and the Sludge Nabber and Swing Sampler for tanks and channels, all in Sludge and Sediment Sampling. Monitoring: Sludge Judge tubes for a blanket profile and Markland sludge blanket monitors. Treatment: Teknofanghi thickeners, belt filter presses and bag dewatering, in Sludge and Sediment Treatment, and Sampson silt bags. Everything is quoted: send the sludge type and volume with a quote request.
A grab sampler, such as a dredge or the Snapper, collects the surface layer of the bottom in one drop, for surveys of surface sediment. A core sampler collects a column, so you can see and sample the layers at depth. See our sediment grab sampler guide.
The Sludge Judge brings up a physical core in a clear graduated tube for a full depth profile; the Markland Sludge Gun gives an instant reading at one point with nothing to retrieve. Many plants use the Judge for periodic profiles and the Gun for quick daily checks. See Sludge Judge vs Sludge Gun.
Volume decides. TEKNOBAG DRAIMAD treats 2 to 20 m³ of sludge a day at 1% dry solids and needs room to store the bags while they drain; the MONOBELT belt filter press runs continuously at 1 to 140 m³/h. Both use polymer.
