Water and groundwater sampling equipment in one place: bladder, peristaltic and 12V submersible pumps with controllers, Waterra inertial pump systems and tubing, disposable and reusable bailers, coliwasas, drum thieves, dippers, inline filters and fittings. Request a quote.
Bladder Material: Virgin PE | Sizes: 0.850 or 1.66 in
Thermoplastic | Fits 2" & 4" monitoring wells | OD 1.88" (2" well) / 3.88" (4" well) | ~1/16" annular gap | Press-fit on D-25 or D-32 Foot Valve
Transfer Rate: 22 oz./Stroke | Fits Gallon Size: 55 Gal. | Body Material: PVC | Adaptor Type: 2" Bung
316 SS or Acetal (Delrin) | 10–32 mm OD | Micro/Low/Standard/High Flow | Up to 4 gpm (15 L/min) | Lift up to 300 ft (90 m)
PTFE construction | Replacement valve assembly | For 1" OD PTFE Coliwasa samplers (models 6990/7100/7110/7120) | Sold as 1 unit
Polyethylene construction | Fits 1.5–1.6\" dia. bailers | Case of 24 | Slow laminar flow for VOC sampling | PFAS testing approved
Flow Rate: 40 mL/min to 3.2 L/min | Suction Lift: up to 10 m (33 ft) | Power: 12 V DC
3 L/min flow rate @2m | 8m max sampling depth | 12V Li-ion battery | Silicone tube OD 11.1mm / ID 6.3mm | FDA, EC & BFR compliant tubing
0.45 µm pore size | PES membrane | 300 cm² (FMT-45) or 600 cm² (FHT-45) | 3/8" threaded + 1/2" hose barb | PFAS/PFOS/PFOA free
Nylon 6 (natural) or Black HDPE | Sizes: 1/8\" to 1-1/2\" I.D. | Straight barb-to-barb hose mender | Nylon temp: -40°C to 100°C | HDPE temp: -55°C to 90°C
Nylon 6 (natural) & Black HDPE | Sizes 1/8\" to 5/8\" I.D. | 10/pack | HDPE temp: -55°C to 90°C | Nylon temp: -40°C to 100°C
For All Foot Valves Except WA-SS-06, WA-SS-09 & WA-SS-19
100% virgin HDPE/LDPE resin | HDPE working pressure: 65–250 psi @ 73°F | LDPE working pressure: 70–135 psi @ 73°F | Available diameters: 1/4" to 1" OD | Roll lengths: 100, 200, 500 ft | FDA 21 CFR 177.1520 compliant | PFAS-free
16 oz / 500 ml, 12 ft Handle, 2 Piece Handle
16 oz / 500 ml, 3 ft Handle, 3lbs
Borosilicate Glass | 42\" Length | 9mm–18mm OD | 50–200 ml Capacity | Standard & Pre-Cleaned
HDPE (virgin) | 42" L | 50–150 ml capacity | 9–16 mm OD | Available Standard, Pre-cleaned, Sterilized, Anti-static
Dimensions: 15.5'' Length x 22.5'' Height x 14.5'' Width | Weight: 28.6 lbs (13 kg)
200 ml Coliwasa Viton Seal, Glass, 42" Long, 12/Case
240 ml Coliwasa, Teflon®, 1" x 2' Long, 1 Unit
Dimensions: 15'' Length x 20'' Height x 7'' Width | Weight: 38 lbs (17.25 kg) | Powered By: 3/4 hp (6 Amps) Volt DC Electric Motor | Additional Requirements: 110 Volt, tubing actuator
Length: 24'' | Height: 17'' | Weight: 8 lbs | Powered By: Manual Operation
Telescopic aluminum handle | Polypropylene sampling head | 1000 mL wide-mouth jar capacity | 4 lengths: 4'–8', 5'–12', 7'–18', 7'–24' | Optional displacement plunger (1\" headspace)
This hub gathers the equipment used to purge and sample monitoring wells and to sample liquids from drums, tanks and open water. For wells there are water sampling pumps (bladder, peristaltic and 12V submersible) with their controllers, bailers, Waterra inertial pump systems with HDPE and LDPE tubing and tubing actuators, 0.45 µm inline filters for dissolved metals, and Solinst drive-point piezometers. For containers and surface water there are coliwasas, drum thieves, dippers and sub-surface samplers in drum and tank samplers. Fittings, check valves, a bailer retriever and bailer rope round out the range.
Tell us the well diameter and depth, or the container, and your analyte list, and we will recommend a setup.
A bailer is the simplest tool and needs no power. Waterra inertial pump systems use dedicated HDPE or LDPE tubing with a foot valve, worked by hand, with the lever arm or with a powered actuator: the Hydrolift-2 works 2-inch wells to 150–200 ft, and the PowerPack PP1 lifts water from over 60 m. Where your protocol calls for low-flow sampling, use a bladder, peristaltic or 12V submersible pump with a controller; our low-flow sampling guide explains the method.
For dissolved metals, yes: the sample is filtered before analysis to remove suspended particles. Waterra disposable inline filters use a 0.45 µm PES membrane, in a 600 cm² high-turbidity version (FHT-45) and a 300 cm² medium-turbidity version (FMT-45), and ERE's Sampson Filter 45 is a 0.45 micron high-turbidity filter. Follow your lab's and your program's requirements.
Yes, with a passive no-purge sampler such as the HydraSleeve: it is lowered below the target depth, left to equilibrate and fills as it is pulled up through the target zone. No purge water means no purge-water disposal. It suits low-yield or slow-recharge wells and discrete-interval profiling, not high-volume purging; see our HydraSleeve guide.
Use container samplers: coliwasas for layered or unknown waste, drum thieves for clean single-phase liquids, and long-handled dippers or telescopic sub-surface samplers for tanks, lagoons and manholes. For sterile single-use samplers, see liquid sampling devices.
