Skip to content
Agents online · Mon–Fri 8:00–4:30 ET
Serving U.S. teams · Prices in USD
In-house calibration
Fast worldwide shipping
Real tech support
Since 1994

Shock-Absorbing Lanyards: Energy Absorbers, Types and How to Choose in Canada

Miller Honeywell energy-absorbing lanyard with green webbing and snap hooks laid on a steel beam at an industrial construction site

Miller Honeywell energy-absorbing lanyard with green webbing and snap hooks laid on a steel beam at an industrial construction site

In This Article

    A shock-absorbing lanyard is a fall-arrest lanyard with a built-in energy absorber that tears or stretches in a fall, so the force on the worker and the anchor stays below a set limit. To choose one, match the lanyard to the worker's weight range, the free-fall distance and the clearance below, then pick the leg count and the connectors for the anchor. This guide compares the Miller, PIP Dynamic and 3M Protecta energy-absorbing lanyards that ERE Inc. supplies in Canada.

    In this guide


    What is a shock-absorbing lanyard?

    A shock-absorbing lanyard (also called an energy-absorbing lanyard or fall arrest lanyard) joins the back D-ring of a full-body harness to an anchor point. Inside the pack on the lanyard, a specially woven core or folded webbing deploys during a fall and spreads the stopping force over distance instead of delivering it in a single jolt. The result is a lower peak force on the body and on the anchorage than a plain strap would give.

    It is one piece of a personal fall arrest system. The other pieces are a certified fall arrest harness and an anchorage such as a roof anchor or a beam anchor. Where you cannot give enough clearance for a lanyard, or want to limit free-fall, a self-retracting lifeline is the alternative. For general duties on work at height, start with the CCOHS fall hazards page and your provincial regulator.


    What does CSA Z259.11 require of energy-absorbing lanyards?

    CSA Z259.11 is the Canadian standard for personal energy absorbers and lanyards. In its 2017 edition, per the 3M white paper on Z259.11-17, the main changes for users are:

    • Instructions by weight and free-fall. Manufacturers must include a table, chart or graphic that shows the permitted range of user weights and free-fall distances for the device.
    • Published performance values. A maximum deployment (Xmax) and an average arrest force must be published, and the absorber label carries the permitted user mass range and the maximum deployment factor.
    • Test limits. Absorber performance is based on average deceleration between 2.3 g and 7 g, a maximum deceleration of 10 g, and a minimum breaking strength of 16 kN (3,600 lbf).
    • A Class Y lanyard. The standard adds a Class Y for two-legged (100% tie-off) lanyards, with an energy absorber, bringing the total to seven lanyard classes.
    • End-of-service guidance. Manufacturers must give end-of-service recommendations.

    Because the absorber is chosen for a weight and a free-fall distance, read the label on the product you buy. The Miller lanyard photographed on this page, for example, carries a label giving a maximum free-fall distance of 1.8 m (6 ft), a weight range of 54 to 152 kg (120 to 335 lbs) and a maximum deployment of 1.85 m. Always confirm the figures on the actual product and in its instructions.


    Single leg, Y-lanyard or tie-back: which style fits?

    Use a single-leg lanyard when the worker stays at one anchor, a twin-leg Y-lanyard when the worker must stay tied off while moving between anchors, and a tie-back lanyard when the anchor is a cross-arm or beam that you wrap the lanyard around. The main styles compare as follows:

    Style Best for Example from our range
    Single leg, fixed length One anchor point, simplest option Dyna-Pak single-leg with E6 absorber, 6 ft Dyna-Pak adjustable single-leg with E4 absorber
    Y-lanyard (two legs) 100% tie-off while changing anchors Dyna-Pak double-leg Y-lanyard with E6 absorber
    Stretch / contracting Less tripping and snagging: contracts from 6 ft to 4 ft Miller StretchStop
    Tie-back Wraps a beam or cross-arm, avoids a separate anchor strap Miller BackBiter
    Shock absorber only (add-on) Short extension, connects a restraint or positioning leg 3M Protecta PRO rope shock-absorber, 1.5 ft
    Rebar / positioning Work positioning, rebar hook anchor 3M DBI-SALA chain rebar/positioning lanyard

    A positioning lanyard is not a fall-arrest lanyard: it holds the worker in place and does not replace an arrest system. Use a lanyard for its listed purpose only.


    Which shock-absorbing lanyards does ERE supply?

    ERE Inc. is a multi-brand distributor, so you can build the harness, lanyard and anchor kit from one supplier. Current ranges include:

    Browse the full fall protection collection for harnesses, anchors, lifelines and connectors. Specifications and availability change, so confirm details on the product page or ask us.


    How to choose a shock-absorbing lanyard

    1. Weigh the worker with tools. Use the total, including tools and gear, and confirm it falls inside the lanyard's stated weight range.
    2. Find the free-fall distance. A lanyard tied off above the dorsal D-ring limits free-fall; a lanyard tied off at foot level creates a longer fall and needs a lanyard rated for it.
    3. Calculate the clearance. Add the lanyard length, the absorber deployment (Xmax from the label) and harness stretch, and compare it to the distance to the level below.
    4. Choose the leg count. One leg for a fixed position, a Y-lanyard if you must stay tied off while moving.
    5. Match the connectors. Check that the snap hook or rebar hook fits the anchor, and that connectors lock.
    6. Check the standard. Look for CSA Z259.11 on the label and for the absorber class where one is stated.
    7. Inspect before every use. Remove a lanyard from service if the absorber pack is deployed or damaged, or if webbing is cut, frayed or burned.

    Need lanyards for a crew or a shutdown?

    Tell us the work, the anchor points and the worker weights, and we will match lanyards, harnesses and anchors.

    Request a Quote  |  Fall protection collection


    Frequently asked questions

    What is a shock-absorbing lanyard?

    It is a lanyard with a built-in energy absorber that deploys in a fall to limit the force on the worker and the anchor.

    What is the difference between an E4 and an E6 energy absorber?

    The class describes the maximum arresting force: 4 kN (about 900 lbf) for E4 and 6 kN (about 1,300 lbf) for E6, according to manufacturer instructions. Check which class the lanyard you buy carries.

    How long can a fall arrest lanyard be?

    Many are 6 ft (1.8 m), which is also the maximum free-fall distance printed on some Miller labels. A shorter or contracting lanyard such as the StretchStop reduces tripping. Confirm the maximum free-fall on the label.

    When must a lanyard be replaced?

    Remove it from service after a fall, if the absorber pack has deployed, or if you see cuts, burns, chemical damage or worn stitching. Follow the manufacturer's end-of-service guidance, which CSA Z259.11-17 requires them to provide.

    Related articles

    Lire en français : Longe antichute à absorbeur d'énergie : types et choix au Canada