Skip to content
Agents online · Mon–Fri 8:00–4:30 ET
Montreal HQ · Serving North America
In-house calibration
Fast worldwide shipping
Real tech support
Since 1994

Fall Protection Carabiners and Snap Hooks: Gate Types, Ratings and How to Choose in Canada

Steel self-locking fall protection carabiner clipped to a galvanized beam anchor point at an industrial plant

Steel self-locking fall protection carabiner clipped to a galvanized beam anchor point at an industrial plant

In This Article

    A fall protection carabiner or snap hook is the connector that joins a lanyard, SRL or lifeline to a harness D-ring or anchor, and the right one is self-closing, self-locking and rated for 16 kN (3,600 lbf) gate strength. Choose by gate action, size of the anchor or ring it must fit, and the equipment it connects, not by price.


    What is the difference between a snap hook and a carabiner?

    A snap hook has a hinged gate that closes against a nose; a carabiner is a closed oval, D or pear-shaped loop with a gate on one side. Both are connecting components in a personal fall arrest system, and both are judged against the same gate-strength test.

    In practice, snap hooks come factory-attached to lanyards and SRLs, while carabiners are the loose connector you add to extend, adapt or re-anchor a system. Searches for both terms (about 880 a month for "snap hook" and 590 for "locking carabiner" in Canada) usually come from buyers replacing a worn connector or adding one to an existing kit.

    What does CSA Z259.12 require of a fall protection connector?

    The CSA Z259.12 standard for connecting components for personal fall-arrest systems sets strength and gate requirements for snap hooks, carabiners and rings. The widely quoted gate test is a load of at least 3,600 lbf (16 kN) without the gate separating from the nose or body by more than 0.125 in. (3.175 mm), as written in OSHA 1910.140.

    For your own procedure, confirm the certification marking on the connector and the manufacturer's instructions, and apply the connector inspection rules in your provincial OHS regulation. The CCOHS falls overview is a good starting point for the program around the hardware.

    Which gate type should you choose: auto-locking, twist-lock or screw-lock?

    Choose an auto-locking (self-closing, self-locking) gate for fall arrest, because it closes and locks without a deliberate action by the worker. Screw-lock gates depend on someone remembering to close them and are a weaker fit for a connector that is clipped and unclipped all day.

    • Auto-locking / self-locking: the gate must be pushed and turned or squeezed to open, and springs shut on release. The MSA steel carabiner is listed as auto-locking.
    • Triple action / auto-twist lock: three distinct movements to open. The PIP Dynamic alloy steel auto-twist lock carabiner is a heat-treated alloy steel pear shape, listed as triple action and CSA, ANSI and CE certified.
    • Twist-lock gates: the Miller steel carabiners are listed with twist-lock gates and a 400 lb (181.4 kg) maximum capacity.

    What size and shape of carabiner fits your anchor or D-ring?

    Pick a shape that lets the load sit along the major axis of the connector, with a gate opening big enough for the ring or anchor it must clip to. An offset D shape keeps the load on the spine of the carabiner and away from the gate.

    How do you read the rating on a carabiner listing?

    A listing can quote three different numbers, so read which one it is: a worker capacity (for example 400 or 420 lbs), a gate strength (3,600 lbs) or a major-axis tensile strength (for example 5,000 lbs). They are not interchangeable.

    Connector Gate Listed rating Material
    3M offset D-shaped Self-closing, captive eye pin 5,000 lbs, CSA Z259.12 Alloy steel
    MSA carabiner Auto-locking 5,000 lbs Steel
    3M DBI-SALA Saflok Self-locking / closing 3,600 lb gate Steel
    3M DBI-SALA Rollgliss offset-D Self-locking / closing 3,600 lb gate Steel
    3M DBI-SALA anchorage connecting Self-closing, locking 420 lbs Zinc-plated steel
    PIP Dynamic auto-twist lock Triple action, auto-twist CSA, ANSI, CE certified Heat-treated alloy steel
    Miller carabiners Twist-lock 400 lbs maximum capacity Steel

    If a connector's use case is not written on its listing or label (fall arrest, positioning, rescue or tool tethering), ask before you buy. Request a quote and give us the equipment it will connect.

    Where does the carabiner sit in the rest of the system?

    It is one link in a chain that is only as strong as the weakest component: harness D-ring, connector, lanyard or SRL, anchor. Match the connector to the parts on either side of it, then confirm the system's clearance and anchor strength.

    Browse the full fall protection collection.

    Frequently asked questions

    Can I use a climbing carabiner for fall protection at work?

    Use only a connector marked and certified for personal fall arrest on your jurisdiction's standard. A connector not rated for fall arrest has no gate-strength rating you can rely on.

    How often should a fall protection carabiner be inspected?

    Inspect it before every use for a gate that sticks or does not lock, cracks, corrosion, deformation and a worn or loose pin, then follow the manufacturer's schedule and your employer's formal inspection procedure.

    What does "auto-locking" mean?

    The gate closes by spring and locks without a separate step by the worker, so a connector that is clipped on is closed and locked by default.

    Does ERE stock these carabiners?

    The models above are listed in our catalogue. Availability varies by model, so request a quote and we will confirm current stock and lead time.


    Need help choosing a fall protection connector?

    ERE Inc. has supplied environmental and safety equipment from Montreal for 30+ years. Tell us the harness, lanyard or SRL and the anchor, and we will match the connector.

    → Request a Quote | 1-888-287-EREC | Browse Fall Protection | sales@ereinc.com

    Lire en français : Mousqueton et crochet à ressort antichute : types et choix au Canada