VOC Sampling Tubing is available in both HDPE or LDPE, 100 and 500 foot coils with dimensions of 1/4" O.D. x 0.17" I.D. This tubing is suitable for collecting VOC samples from the Inertial Lever Pump (WA-WLP-100) utilizing the recommend technique below:
After purging a well, approximately 7 feet of the VOC tubing is inserted inside the sampling tube leaving about one foot protruding out the end of the riser. When pumping is stopped the sample tubing will cease to produce water, however the VOC’s tube will continue to flow operating as a siphon, drawing water down the level standing in the tubing. This siphon action can easily be used to collect small samples for volatile analysis as the flow from the narrow tube is steady, laminar and easily directed into a glass vial.
| Part Number | Model | Length |
| WA-1/4-HDPE-100 | HDPE Tubing | 100 ft |
| WA-1/4-HDPE-500 | HDPE Tubing | 500 ft |
| WA-1/4-LDPE-100 | LDPE Tubing | 100 ft |
| WA-1/4-LDPE-500 | LDPE Tubing | 500 ft |
Related equipment we stock
SOLINST Drive-Point Piezometers
316 SS body & screen | 3/4\" NPT drive pipe | 50 mesh cylindrical filter screen | Max depth 7 m (25 ft) | 5 configurations: 615 / 615N / 615C / 615S / 615SN
PeriPump
3 L/min flow rate @2m | 8m max sampling depth | 12V Li-ion battery | Silicone tube OD 11.1mm / ID 6.3mm | FDA, EC & BFR compliant tubing
Groundwater Inline Filters
0.45 µm pore size | PES membrane | 300 cm² (FMT-45) or 600 cm² (FHT-45) | 3/8" threaded + 1/2" hose barb | PFAS/PFOS/PFOA free
Connectors-Barbed
Nylon 6 (natural) or Black HDPE | Sizes: 1/8\" to 1-1/2\" I.D. | Straight barb-to-barb hose mender | Nylon temp: -40°C to 100°C | HDPE temp: -55°C to 90°C