Polyelectrolyte in Powder!
Polyelectrolyte preparation and dosing equipment has been designed for use with our range of sludge dewatering equipment.
This automatic units are suitable for applications where the polyelectrolyte must be fed on a continuous basis with accurate control of dilution and ageing. The automatic units are suitable for large waste water treatment plants where the MONOBELT® and SCRUDRAIN® are installed.
Polyelectrolyte is mixed with a controlled volume of water and enters the dilution tank where it is mixed using a 45° three bladed mechanical stirrer. It then passes to the dispersion tank where it is further mixed before passing into the ageing and storage tank. Polyelectrolyte solution is withdrawn from this tank by dosing pump (optional). The concentration of the solution can be controlled by adjusting either the water flow rate or the polyelectrolyte input rate.
This series of equipment are made of anticorrosive materials and all metal parts are manufactured from stainless steel AISI 304.
Automatic and continuous polymer preparation system, TE-CAP Series, comes complete with:
• Microdoser with hopper, equipped with lump breaker and variable speed screw conveyor to accurately dose the pure polyelectrolyte
• Water flow regulation and water feed assembly line complete with manual check valve, pressure reducer with gauge, needle valve, pressure switch, solenoid valve and flowmeter
• Predilution chute
• Dilution tank with slow speed stirrer
• Dispersion tank with slow speed stirrer
• Aging and storage tank equipped with two level sensors to control cycle and protect dosing pump
• Electric control board produced to IP65
The outlet manifold is available in all the units.
Options |
|
| TEPD-MH Eccentric Screw Dosing Pumps For Polyelectrolyte, Complete W/ Variable Speed Worm Geared Motor, Available As Follows: |
|
| TEPD-MH010-B3 | Eccentric Screw Dosing Pump, Max Delivery 1.1 m³/h |
| TEPD-MH020-B2 | Eccentric Screw Dosing Pump, Max Delivery 2 m³/h |
| TEPD-MH040-B2 | Eccentric Screw Dosing Pump, Max Delivery 4 m³/h |
| TEPD-MH060-B2 | Eccentric Screw Dosing Pump, Max Delivery 6 m³/h |
Related equipment we stock
POLYDILUTION® TE-CMP Manual Series
300 / 500 / 1000 L tanks (CMP03 / CMP05 / CMP10) | AISI 304 stainless steel metal parts | Plunger metering pump, manual flow adjustment 10–100% | Polyethylene tank with visual level gauge | For small WWTPs, pairs with TEKNOBAG®-DRAIMAD®
POLYDILUTION® TE-CAP Series - Emulsion
Emulsion-base polyelectrolyte | Max 2,000 or 6,000 L/h solution | AISI 304 stainless steel | Automatic, digital controller | Min. 20 min ageing
Teknofanghi SCRUDRAIN® Dynamic Drum Sludge Thickener
Thickens 0.5–3% DS sludge to 5–15% DS | Capacity up to 200 m³/h per unit | Capture rate up to 98% | Archimedean-screw rotating drum | Plug-and-play with control panel + washing pump
Teknofanghi SCRUFILTER® Continuous Microfiltration System
Microfiltration down to 20 µm | Filter cloths 20/30/40/60/80/100 µm | Gravity-fed continuous filtration, minimal head loss | ABS supports + polyester cloth (full AISI 304 option) | 90% less reject water, no external wash water