A. Sample from bottom of a container
- Use a Lowering Cable
The Sub Sampler pro is lowered until the plunger assembly touches the bottom of the container. As the plunger assembly is pushed up, the sample is able to enter the device. When the sampler is raised, the plunger will drop down and seal the sampler.
B. Mid-height sampling
- Use a Lowering Cable and a Control Line
Lower the Sub Sampler Pro into the liquid. At the required sampling depth pull on the control line to raise the plunger. This will allow the liquid to enter the sampler. Release the control line and the plunger will drop down and seal the sampler.
| Part Number | Volume | Material | Diameter | Length | Ex Rated |
| SS-5072A-500 | 500ml | Nickel Plated Brass | 52mm | 427mm | No |
| SS-5072A-1000 | 1000ml | Nickel Plated Brass | 75mm | 438mm | Yes* |
| SS-5072B-500 | 500ml | 316L Stainless Steel | 66mm | 300mm | No |
| SS-5072P-500 | 500ml | PTFE | 70mm | 371mm | No |
*Make sure the sampler is properly earthed (grounded) use the Ex Hand Reel (5070D-05 and Copper Cable (5070C)
Related equipment we stock
SteriWare® ViscoThief
Length: 500 mm (19.7'') | Outer Diameter: 21 mm (0.8 | Sampling Hole: 10 mm (0.4'') | Volume: 100 ml
SteriWare® Jumbo Pipettes
Length: 450 mm (17.7'') | Diameter: 21 mm (0.8'') | Internal Diameter: 17 mm (0.7'') | Maximum Sample Volume: 80 ml
ULTRA Ladle
Natural PP SteriWare® Ladle
Length: 453 mm (17.8'') | Diameter Of Cup: 43 mm (1.7'') | 40/Box