Skip to content
Agents online · Mon–Fri 8:00–4:30 ET
Montreal HQ · Serving North America
In-house calibration
Fast worldwide shipping
Real tech support
Since 1994
Department

Controllers

Controllers that run and set the flow of groundwater sampling pumps: the Solinst Model 464 (125 or 250 psi) and Geotech 300 and 500 psi BP controllers for bladder pumps, and Proactive Low Flow and Power Booster controllers that hold 12V pumps down to 40 ml/min.

3 specialists online · Mon–Fri 8:00–4:30 ET
6 products
300 psi & 500 psi BP Controllers
GT-BPC-300PSI

300 psi & 500 psi BP Controllers

• Operating Depth: 0 - 690 ft (210 m) | • Input Air Pressure: Up to 300 psi (20.5 bar) | • Fill Timer Range: 5 - 120 seconds | • Discharge Timer Range: 5 - 120 seconds

Price on quote · 4 business hours
Low Flow With Power Booster 4 Controller
PRO-PA-10950

Low Flow With Power Booster 4 Controller

Min flow 40 mL/min (Fractional Flow®) | LVD 10.75V | CVBT technology | 7-ft battery lead / 8-ft pump lead | Heavy-duty reinforced plastic housing

Price on quote · 4 business hours
Low Flow Sampling Controller
PRO-PA-10800

Low Flow Sampling Controller

12V DC input | Flow control ≥40 mL/min | Low-voltage disconnect at 11V | Weatherproof reinforced plastic case | 7 ft battery leads + 8 ft pump leads

Price on quote · 4 business hours

Controllers that drive groundwater sampling pumps and set their flow. For bladder pumps: the Solinst Model 464 electronic controller (125 or 250 psi output) runs up to 100 hours on four AA batteries, stores up to 99 user flow rates and can also run manually from a compressed gas source; Geotech 300 and 500 psi BP controllers drive bladder pumps to 690 ft (210 m), with fill and discharge timers from 5 to 120 seconds. For Proactive 12V pumps: the Low Flow Sampling Controller, the Power Booster and the Low Flow With Power Booster models regulate flow down to 40 ml/min, with a low-voltage disconnect.

Pump controller FAQ

Which controller for my pump?

Match it to the pump. The Solinst 464 and Geotech BP controllers run bladder pumps on compressed gas; each Proactive controller is engineered for specific 12V pumps, such as the stainless Monsoon, Hurricane and Mega-Monsoon XL pumps or the Abyss 300 plastic pump.

What flow does low-flow sampling need?

A steady, adjustable flow, typically 100 to 500 ml/min. The Proactive controllers regulate 12V pumps down to 40 ml/min with a turn of a knob; bladder pump controllers set the fill and discharge cycle. See water sampling pumps.

How deep can a bladder pump controller work?

Geotech's BP controllers take input air up to 300 psi and operate to 690 ft (210 m); the Solinst 464 gives 125 or 250 psi output, depending on model.