
RhinoSand™ Zeolite
Media: clinoptilolite zeolite | Mesh: 14×40 (0.4–1.4 mm) | Density: 55 lb/ft³ | Filtration: <5 µm nominal | Capacity: 2.6–2.8× sand
Environmental remediation equipment built by ERE for water, air and soil: mobile water treatment pods and containers, air strippers, soil vapour extraction, sparging and biopile systems, carbon air units, oil/water separators, filtration media and bioremediation. Rent or buy.

Media: clinoptilolite zeolite | Mesh: 14×40 (0.4–1.4 mm) | Density: 55 lb/ft³ | Filtration: <5 µm nominal | Capacity: 2.6–2.8× sand

50/50 organoclay + coconut GAC | 8x30 mesh | Iodine ≥1150 mg/g | Density 43-45 lb/ft³ | pH 4-10 | 50 lb

Granular activated alumina | Al2O3 93% | Surface area 330 m²/g | Bulk density 48 lb/ft³ | Mesh 14x28 & 28x48

Iron-enhanced activated alumina | Surface area 280 m²/g | Bulk density 66 lb/ft³ | Mesh 14x28 & 28x48 | NSF/ANSI 61

Cu-Zn redox alloy | ~15 gpm/ft² service | 10-15% bed expansion | pH 6.5-8.5

Effective size 0.30-0.35mm | 2-12 gpm/ft² | pH 6.2-8.5 | NSF/ANSI 61

Effective size 0.48mm | 3.5-5 gpm/ft² service | pH 6.8-9.0 | max 100°F

75-85% MnO2 | 12x40 mesh | 6 gpm/cu.ft | pH 6.5-9.0 | NSF/ANSI 61 | 0.5 cu ft / 57 lb

Mixed bed SAC+SBA | H+/OH- regenerated | ~1:1 equiv | 425-1200 um | UC max 1.7 | DI/ultrapure | 1 ft3/bag

SBA gel | quaternary ammonium | Cl- form | cap 1.3 eq/L | 300-1200 um | pH 0-14 | max 100C(Cl)/60C(OH) | 1 cu ft / 43 lb

Coconut shell GAC | chlorine/taste/odor | max 110°F | max 125 psig | min 30 psig inlet

SAC gel 8% crosslink | 16x50 mesh | cap >2.0 eq/L | 2-5 gpm/ft3 | pH 0-14 | NSF/ANSI 61 | 1 cu ft / 52 lb

Catalytic coconut shell | 12x40 mesh | iodine min 1000 mg/g | BET 1060 m2/g | hardness min 98% | 1 cu ft ~29 lb

Zeolite | 14x40 mesh | 5 micron nominal | 12-20 gpm/sq.ft | bed 36-48 in | NSF/ANSI 61 & 372

Air-phase activated carbon | Application: cannabis odor control

Air-phase activated carbon | Target: VOCs

Sulfur-impregnated air-phase activated carbon | Target: mercury vapor

KOH-impregnated air-phase activated carbon | Target: acid gases / H₂S

Air-phase activated carbon | Target: ammonia (NH₃)

Coconut-shell activated carbon (air-phase) | 55 lb box

Air-phase activated carbon | Application: air-emission contaminant / TOC removal

Coconut-shell GAC | Iodine ≥1000 mg/g | Hardness ≥97% | Sizes 8x30, 12x40 & powder
ERE designs and builds remediation equipment in Canada and supplies it for rent or purchase across Canada and the USA. For water: mobile water treatment systems from 45 to 500 GPM, the VOCease air stripper, pH adjustment, the MiniFloc batch separation system, the Romikon 50 ultrafiltration system and OlioSep separators. For soil: EvacuSol soil vapour extraction blowers, explosion-proof for Class 1, Div. 1 and 2, Group D, the sparging system and BioVent biopile systems. For air and off-gas: AirPod and UltraSorber-Air carbon vessels. And the consumables: filtration media, air-phase carbons and bioremediation products such as BIIO™ bacteria and OxyClean oxygen release.
See how the systems work together on the Remediation page, then send us the site, the contaminants and the volumes.
Both are possible: ERE supplies its mobile and containerized water, air and soil treatment systems for rental or purchase, across Canada and the USA. Short projects and pilot tests usually rent; long-term treatment often buys. Tell us the duration and we will quote both.
Soil vapour extraction pulls VOC vapours out of the unsaturated soil with a vacuum blower; air sparging injects air below the water table to strip contaminants into the soil gas; bioventing and biopiles feed air to the soil to speed up biodegradation. Many sites combine them. See our guides to soil vapour extraction and sparging vs bioventing.
EvacuSol blowers run from 0.5 to 10 HP, with open flows of 55 to 400 SCFM and up to 98 inches of water vacuum; the 2 HP skid suits small and pilot projects and the 10 HP skid full-scale extraction. The extracted vapour is then treated, typically in an AirPod or UltraSorber-Air carbon vessel.
Yes: activated and catalytic carbon, activated alumina, resins and specialty media for water, UltraSorber air-phase carbons, and bioremediation products such as BIIO™ high-grade bacteria (dosed at 4 L per cubic metre of soil) and AIC OxyClean slow- and fast-release oxygen. Our remediation equipment guide maps the options.