Ultimate Precision Cleaner

• Concentrated to save you money
• Exceptional cosmetic and pharmaceutical polymer, cream and lotion removal
• Non-caustic for greater worker safety and greater material compatibility
• Free rinsing to give you reliable results and no interfering residuesl

Used to clean

Cosmetic bases and formulations, organics, grease, tars, resins, waxes, fats, oils, titanium and zinc oxides, ointments and lotions.

Surfaces cleaned

Recommended for glass, stainless steel, PTFE, ceramic, cement and solvent resistant plastics and metals. Corrosion testing is advisable.

Cleaning method

Soak, circulate under immersions, ultrasonic cleaners, and manual cleaning.

Directions

Make a fresh 1-3% solution (1 ¼ - 3 3/4 oz. per gal. or 10-30 ml per liter) in cold, warm or hot water. If available, use very hot water to clean cosmetic residues. For difficult soils, raise water temperature and use more detergent. Elevation of temperature is true under most circumstances. Check with Alconox Inc, for use of hot water if products contain Titanium Oxide (TiO) or Zinc Oxide (ZnO) as they are notable exceptions to heat expediting detergency. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in purified water.

Caution

Contains anionic and nonionic surfactants with phosphate chelating agents. May cause skin and eye irritation. Wear eye protection and chemical resistant gloves.

Chemical Description

Detonox contains anionic and nonionic detergent with wetting agents and emulsifiers with phosphate builders.

Cleaning Validation Methods

Parameters measured include: conductivity, Total Organic Carbon, spectrographic methods, and HPLC.