Specifications
• Specifically designed for reduction of bacteria and spoilage organisms in beverage applications.
• Asymmetric, hydrophilic polyethersulfone membrane filter
• Absolute retention from 0.1 to 1.2 microns
• Manufactured in a Class 10,000 clean room for high purity
• 100% flushed and integrity tested to ensure rated pore size
• High surface area for maximum throughput and long service life
• Suitable for steam or autoclave sterilization and hot water or chemical sanitization
• Constructed of FDA listed materials and meets USP Class VI Biological Test for plastics
Applications
• RO Pre/Post Filtration
• Food & Beverage
• DI Water
• Bottled Water
• Plating Solutions
• Microelectronics
• Specialty Chemicals
• Process Water
• Water & Wastewater
• Cosmetics
| Pore Sizes | 0.03, 0.1, 0.2, 0.45, 0.65, 0.8, 1.0 and 1.2 microns absolute retention |
| Nominal Lengths | 9.75" (24.7 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm) |
| Outside Diameter | 2.67" (6.78 cm) |
| Inside Diameter | 1.0" (2.54 cm) |
| Media Surface Area | 7.2 sq.ft. (0.67 m2) per 10 inches filter length |
| Gaskets/O-rings | Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (o-rings only) |
| Materials of Construction | Filter Media: Asymmetric Polyethersulfone Outer Cage / Core / End Caps: Polypropylene |
| Maximum Operating Temperature | 176°F ( 80°C) |
| Recommended Change-out Differential Pressure | 35 psid (2.4 bar) |
| Maximum Differential (Collapse) Pressure | 75 psid @ 70ºF (5.2 bar @21ºC), 40 psid @176ºF (2.8 bar @ 80ºC) |
| Sanitization and Sterilization | Hot water at 175ºF (80ºC) at 5 psid for 30 minutes In-line steam at 257ºF (125ºC) @ 1 psid (0.7 bar) for 30 minutes Autoclavable at 257ºF (125ºC) for 30 minutes |
| FDA and USP Compliance | All materials comply with FDA requirements for food contact per CFR Title 21 177.1520. All components meet USP Class VI Plastic biological reactivity tests. |
Similar Products
Request a Quote
Our experts are here to help. We will respond within 24 hours to your request.
Get in Touch with Us
-
1-888-287-EREC (3732)
Monday – Friday 8am - 4:30pm EST -
Montreal - Tel: (514) 326-8852, Fax: (514) 326-8961
Email : sales@ereinc.com
Request a Sample
Need a closer look? Most products have samples available to ensure you are ordering the correct product for your needs. Some restrictions may apply.
