Specifications
• Highly tapered asymmetric pore structure provides excellent flow rate and dirt holding capacity
• 6.0 square feet (0.56 m2) of media surface area per ten inch length for optimal performance
• Rigid, molded cage protects pleated media and strengthens structural stability
• Complies with Food & Drug Administration’s CFR criteria for food & beverage contact
• Available in common and end cap configurations to fit most filter housings
Applications
• Tank Ventilation
• Process Gases
• Compressed Air
Pore Sizes | 0.2 microns absolute retention |
Nominal Lengths | 9.75" (24.7 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm) |
Outside Diameter | 2.67" (6.78 cm) |
Inside Diameter | 1.0" (2.54 cm) |
Media Surface Area | 6.0 sq.ft. (0.56 m2) per 10 inches filter length |
Gaskets/O-rings | Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (o-rings only) |
Materials of Construction | Filter Media: Hydrophobic Polysulfone Outer Cage / Core / End Caps: Polypropylene |
Maximum Operating Temperature | 176°F ( 80°C) |
Recommended Change-out Differential Pressure | 35 psid (2.4 bar) |
Maximum Differential (Collapse) Pressure | Forward: 75 psid @ 70˚F (5.2 bar @ 21˚ C) Reverse: 40 psid @ 176˚F (2.8 bar @ 80˚ C) |
Sanitization and Sterilization | Hot water at 175°F (80°C) at 5 psid for 30 minutes In-line steam at 257°F (125°C) @ 1 psid (0.7 bar) for 30 minutes Autoclavable at 257°F (125°C) for 30 minutes |
FDA and USP Compliance | All materials comply with the requirements of Food and Drug Administration Title 21 of The Code of Federal Regulations 174.5, 177.1520 and 177.1630. |